TIRE PRESSURE WARNING INITIATOR DRIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER

   
   

   1. Attach the 2 claws to install the tire pressure monitor initiator driver.

2. INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the 2 nuts and bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the connectors.

   3. Attach the 4 clamps.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here