STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column) INSPECTION

CAUTION / NOTICE / HINT

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.

PROCEDURE


  1. INSPECT ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY


    1. Secure the electric power steering column sub-assembly in a vise.

    2. A01HI9AC03
      *a Collar
      *b Bushing

      Check that the 2 bushings are securely installed to the electric power steering column sub-assembly.

      Tech Tips

      If the bushings are missing or damaged, replace the electric power steering column sub-assembly with a new one.

    3. Inspect the capsule.


      1. A01HDSQC02
        *a Capsule

        Check that the capsule is securely installed to the electric power steering column sub-assembly as shown in the illustration.

        Standard dimension (A)
        4.8 mm (0.189 in.)

        If the capsule is not positioned as specified, replace the electric power steering column sub-assembly with a new one.

      2. Check the capsule for deformation and damage.

        If the capsule is deformed, loose, missing or damaged, replace the electric power steering column sub-assembly with a new one.