BATTERY CURRENT SENSOR REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick here

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY

    1. A323272

      Disconnect the battery current sensor assembly connector.

    2. Remove the nut and disconnect the battery current sensor assembly from the negative (-) battery terminal.

      Note:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click hereClick hereClick hereClick here

    3. A319313

      Remove the battery current sensor assembly from the engine wire.