REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

    1. E127507C18

      *a

      Component without harness connected

      (Rear Combination Light Lens and Body LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK

      Condition

      Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      Taillight illuminates

      If the result is not as specified, replace the rear combination light lens and body LH.

  2. INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

    1. E127507C18

      *a

      Component without harness connected

      (Rear Combination Light Lens and Body RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK

      Condition

      Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      Taillight illuminates

      If the result is not as specified, replace the rear combination light lens and body RH.

  3. INSPECT REAR COMBINATION LIGHT LED

    1. E339493C03

      *a

      Component without harness connected

      (Rear Combination Light LED)

      Apply battery voltage to the connector and check the light illumination condition.

      OK

      Condition

      Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      Stop light illuminates

      If the result is not as specified, replace the rear combination light LED.