CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM(for 8NR-FTS) TERMINALS OF ECM
ECM
Tip:The standard voltage and resistance between each pair of ECM terminals is shown in the table below.
The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.
Use the illustration above as a reference for the ECM terminals.
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A173-1 (BATT) - B208-53 (E1)
B - W-B
Battery (for measuring battery voltage and for ECM memory)
Always
11 to 14 V
A173-2 (+B) - B208-53 (E1)
B - W-B
Power source of ECM
Ignition switch ON
11 to 14 V
A173-3 (+B2) - B208-53 (E1)
B - W-B
Power source of ECM
Ignition switch ON
11 to 14 V
A173-9 (STP) - B208-53 (E1)
L - W-B
Stop light switch assembly signal
Brake pedal depressed
7.5 to 14 V
Brake pedal released
Below 1.5 V
A173-13 (CANH) - B208-53 (E1)
B - W-B
CAN communication line
Ignition switch ON
Pulse generation
A173-26 (CANL) - B208-53 (E1)
W - W-B
CAN communication line
Ignition switch ON
Pulse generation
A173-29 (STA) - B208-53 (E1)
LG - W-B
Starter assembly signal
Cranking
6.0 V or higher
A173-30 (NEO) - B208-53 (E1)
L - W-B
Engine speed signal sent to other ECUs
Idling with warm engine
Pulse generation
A173-36 (PWMS) - B208-53 (E1)
G - W-B
SPORT switch (combination switch assembly) signal
Ignition switch ON and SPORT switch (combination switch assembly) not being pushed
11 to 14 V
Ignition switch ON and SPORT switch (combination switch assembly) being pushed
Below 1.5 V
A173-42 (SFTU) - A173-41 (ECCS)
W - BR
Up-shift switch signal
Ignition switch ON and shift lever in M
11 to 14 V
Ignition switch ON and shift lever held in "+"
Below 1 V
Ignition switch ON and "+" shift paddle switch operated*
A173-43 (SFTD) - A173-41 (ECCS)
R - BR
Down-shift switch signal
Ignition switch ON and shift lever in M
11 to 14 V
Ignition switch ON and shift lever held in "-"
Below 1 V
Ignition switch ON and "-" shift paddle switch operated*
A173-44 (SPD) - B208-53 (E1)
V - W-B
Vehicle speed signal from combination meter assembly
Driving at 20 km/h (12 mph)
Pulse generation
A173-46 (MREL) - B208-53 (E1)
L - W-B
EFI-MAIN relay
Ignition switch ON
11 to 14 V
A173-57 (NSW) - B208-53 (E1)
W - W-B
Park/neutral position switch signal
Ignition switch ON and shift lever in P or N
Below 1 V
Ignition switch ON and shift lever not in P or N
11 to 14 V
A173-59 (S) - B208-53 (E1)
L - W-B
M position switch signal
Ignition switch ON and shift lever in M
11 to 14 V
Ignition switch ON and shift lever not in M
Below 1 V
B208-1 (SLS+) - B208-31 (SLS-)
B - L
Shift solenoid valve SLS signal
Engine idling
Pulse generation
B208-3 (SLU+) - B208-2 (SLU-)
Y - G
Shift solenoid valve SLU signal
Lock-up turned from OFF to ON
Pulse generation
B208-11 (SLP+) - B208-10 (SLP-)
W - V
Shift solenoid valve SLP signal
Engine idling
Pulse generation
B208-34 (D) - B208-53 (E1)
GR - W-B
D position switch signal
Ignition switch ON and shift lever in D
11 to 14 V
Ignition switch ON and shift lever not in D
Below 1 V
B208-35 (R) - B208-53 (E1)
L - W-B
R position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever not in R
Below 1 V
B208-44 (NIN+) - B208-43 (NIN-)
P - V
Transmission revolution sensor (NIN) signal
Vehicle being driven with shift lever in D
Pulse generation
B208-45 (SC) - B208-53 (E1)
LG - W-B
Shift solenoid valve SC signal
For 1 second after moving shift lever from P to D or R, or N to D or R
Lock-up ON to OFF
Pulse generation
B208-48 (+BM) - B208-53 (E1)
B - W-B
Power source of ECM
Always
11 to 14 V
B208-53 (E1) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
B208-65 (P) - B208-53 (E1)
V - W-B
P position switch signal
Ignition switch ON and shift lever in P
11 to 14 V
Ignition switch ON and shift lever not in P
Below 1 V
B208-66 (N) - B208-53 (E1)
B - W-B
N position switch signal
Ignition switch ON and shift lever in N
11 to 14 V
Ignition switch ON and shift lever not in N
Below 1 V
B208-71 (NTB) - B208-53 (E1)
P - W-B
Power source of transmission revolution sensor (NT)
Ignition switch ON
4.75 to 5.25 V
B208-72 (NTO) - B208-53 (E1)
GR - W-B
Transmission revolution sensor (NT) signal
Vehicle being driven with shift lever in D
Pulse generation
B208-73 (NOTB) - B208-53 (E1)
W - W-B
Power source of transmission revolution sensor (NOUT)
Ignition switch ON
4.75 to 5.25 V
B208-74 (NOTO) - B208-53 (E1)
L - W-B
Transmission revolution sensor (NOUT) signal
Vehicle being driven with shift lever in D
Pulse generation
B208-75 (SL) - B208-53 (E1)
SB - W-B
Shift solenoid valve SL signal
Lock-up operating
Pulse generation
B208-76 (NE+) - B208-109 (NE-)
R - Y
Crankshaft position sensor signal
Idling with warm engine
Pulse generation
B208-86 (PTO) - B208-117 (EPTO)
G - V
Oil pressure sensor signal
Engine idling with shift lever in P
0.8 to 1.2 V
B208-84 (THO1) - B208-83 (ETHO)
SB - W
CVT fluid temperature sensor signal
CVT fluid temperature: 60 to 120°C (140 to 248°F)
0.2 to 1.0 V
B208-110 (VCNE) - B208-53 (E1)
L - W-B
Power source of crankshaft position sensor
Ignition switch ON and engine not running
4.5 to 5.5 V
B208-118 (VCPT) - B208-117 (EPTO)
R - V
Power source of oil pressure sensor
Ignition switch ON
4.5 to 5.5 V
*: w/ Shift Paddle Switch