БЛОК ДВИГАТЕЛЯ


  1. CONSTRUCTION


    1. The cylinder head sub-assembly is made of aluminum alloy. The injector has been located in the center of the combustion chamber in order to improve engine performance and to achieve cleaner emissions.

    2. 2 intake ports with different shapes have been combined to promote the mixture of fuel and air by optimizing the swirl in the cylinder.

    3. A vertical 2-stage construction is used for the water jacket to improve cooling performance.

    4. A glow plug is placed between the intake ports of each cylinder to ensure startability.

    5. The cylinder head bolt employs plastic region tightening bolts.

      B002NBSC01
      *1 Injector Hole *2 Glow Plug Hole
      *3 Exhaust Valve Hole *4 Intake Valve Hole
      *5 Water Jacket - -