MULTI-MODE MANUAL TRANSAXLE SYSTEM CALIBRATION

  1. SYNCHRONIZATION POSITION CALIBRATION

    For smoother shifting, the TCM learns the synchronization position of the transaxle gears. Perform the synchronization position calibration of the multi-mode manual transaxle while driving the vehicle after repairing system components.

    Tip:

    When replacing the multi-mode manual transaxle system parts, proceed with the operation in the order listed.

    Click here

    1. While driving the vehicle in M-mode, shift up and down between 1st and 5th at the vehicle speeds specified below.

    2. Check that the gears shift smoothly.

      Table 1. Recommended Gear Shifting Speeds

      Gear Change

      Gear Position

      Vehicle Speed

      Up shift

      1st→2nd

      22 to 41 km/h (13.7 to 25.5 mph)

      2nd→3rd

      40 to 76 km/h (24.9 to 47.2 mph)

      3rd→4th

      65 to 126 km/h (40.4 to 78.3 mph)

      4th→5th

      78 to 150 km/h (48.5 to 93.2 mph)

      Down shift

      2nd→1st

      22 to 41 km/h (13.7 to 25.5 mph)
      Tip:

      • Leave an interval of more than 2 seconds between gear changes.

      • If there is a shock when changing gears after synchronization position calibration, perform synchronization position calibration again.