WIPER ECU(for LHD) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

    1. Attach the 2 claws to install the windshield wiper relay assembly.

  2. INSTALL ECU INTEGRATION BOX RH

    1. Install the ECU integration box RH with the 2 nuts and bolt.

    2. Connect each connector.

    3. Attach the clamp.

  3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).