THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Engine)

    Click here

  2. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A005ATA

      Disconnect the mass air flow meter connector.

    2. A005EZZ

      Release the 2 clamps.

    3. Loosen the hose clamp and remove the air cleaner cap sub-assembly.

  4. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE


    1. Remove the air cleaner filter element sub-assembly.

    2. A005DHO

      Separate the water hose from the 3 clamps.

    3. Remove the 3 bolts and air cleaner case.

  6. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A005F1U

      Loosen the hose clamp and separate the ventilation hose.

    2. Unlock the hose clamp and remove the air cleaner hose assembly.

  7. REMOVE THROTTLE BODY ASSEMBLY


    1. A005DNV

      Disconnect the throttle body connector and 2 water by-pass hoses.

    2. Remove the 2 bolts, 2 nuts and throttle body assembly.

    3. A005EIV

      Remove the gasket from the intake manifold.