CHARGING SYSTEM PRECAUTION


  1. INITIALIZATION

    Note

    When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

    System Name See Procedure
    LKA/LDA System

    Click here

    Stop and Start System
    Parking Assist Monitor System (w/ Parallel Parking Assist Function)
    Parking Assist Monitor System (w/o Parallel Parking Assist Function)
    Panoramic View Monitor System
    Power Door Lock Control System
    Pre-Crash Safety System
    Power Back Door System
    Lighting System (EXT)
    Adaptive High Beam System

  2. CHARGING SYSTEM PRECAUTION

    Note


    • Check that the battery cables are connected to the correct terminals.

    • Disconnect the battery cables when the battery is given a quick charge.

    • Do not perform tests with a high voltage insulation resistance tester.

    • Never disconnect the battery cables while the engine is running.

    • Check that the charging cable nuts are tightened on terminal B of the generator assembly and on the engine room relay block and junction block assembly.