ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   1. Check and clean the oil cooler assembly installation surface.

   2. Install 2 new O-rings and a new gasket to the oil filter bracket sub-assembly.

   3. Install the oil cooler assembly with the 2 bolts and 2 nuts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

2. CONNECT OIL COOLER HOSE

   

   *a	View A
   *b	RH Side
   *c	Front Side

   1. Connect the oil cooler hose, and slide the clips to secure it.

      Note:

      The direction of the clip is as shown in the illustration.

3. ADD ENGINE OIL

   Click here

4. CHECK ENGINE OIL LEVEL

   Click here

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR OIL LEAK

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here

8. INSTALL OIL FILTER ELEMENT SERVICE HOLE COVER

   Click here