INTAKE AIR TEMPERATURE SENSOR (w/o EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE ENGINE COVER SUB-ASSEMBLY

    A01E04B

    1. Remove the 3 bolts, 2 nuts and cover.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. Disconnect the IAT sensor connector.

    2. A01DWNJ

      Using a 22 mm deep socket wrench, remove the IAT sensor.

      Tech Tips

      Replace the IAT sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the IAT sensor each time the CAC is replaced.