REAR COMBINATION LIGHT ASSEMBLY(except Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

    1. Engage the grommet.

    2. E322608C01

      *a

      Pin

      *b

      Guide

      Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.

    3. Install the rear combination light assembly with the 2 screws.

    4. Connect the connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

    1. Connect the connector.

    2. Engage the 2 claws, 3 clips and 2 guides to install the deck trim side panel assembly LH.

    3. B330907

      for Clip Type:

      1. Engage the clip and guide to install the deck trim service hole cover.

    4. for Hook Type:

      1. Engage the guide.

      2. Install the luggage hold belt striker assembly with the bolt.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  4. INSTALL LOWER DECK TRIM SIDE BOARD (w/ Deck Board)

    Click here

  5. INSTALL NO. 2 DECK SIDE TRIM HOOK

    Click here

  6. INSTALL REAR DECK TRIM COVER

    Click here

  7. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

  8. INSTALL DECK FLOOR BOX RH (w/ Deck Floor Box)

    Click here

  9. INSTALL DECK FLOOR BOX LH (w/ Deck Floor Box)

    Click here

  10. INSTALL REAR DECK FLOOR BOX (w/ Deck Floor Box)

    Click here

  11. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

  12. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click here