COMPRESSOR(for 8NR-FTS) REMOVAL

PROCEDURE

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

    1. E317030

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

    1. E317031

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

    1. E317032

      Disconnect the connector.

    2. E317033C01
      V100135

      Bolt
      V100136

      Nut

      Remove the 2 bolts and 2 nuts.

    3. E317034

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts.

    4. Remove the compressor assembly with pulley.