GLOVE BOX LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    1. B006DDHC01
      B006DHE Install in this Direction

      Attach the claw to install the glove box light assembly in the direction of the arrow shown in the illustration.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. INSTALL GLOVE COMPARTMENT DOOR PAD PLATE

    Click here

  4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  5. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  10. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here