PRE-CRASH SAFETY SYSTEM FREEZE FRAME DATA

  1. CHECK FREEZE FRAME DATA

    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Pre-Crash 2 / Trouble Codes.

      Body Electrical > Pre-Crash 2 > Trouble Codes

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Body Electrical > Pre-Crash 2

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      Turn Light RH

      Turn signal switch (right) status

      ON or OFF

      ON: Turn signal switch (right) on

      OFF: Turn signal switch (right) off

      -

      Turn Light LH

      Turn signal switch (left) status

      ON or OFF

      ON: Turn signal switch (left) on

      OFF: Turn signal switch (left) off

      -

      PCS OFF Switch

      Pre-crash safety system switch status

      ON or OFF

      ON: Pre-crash safety system function disabled due to switch operation

      OFF: Pre-crash safety system function enabled due to switch operation

      -

      Pre-Crash Safety Warning Buz

      Pre-crash safety system warning buzzer

      Valid or Inval

      Valid: Pre-crash safety system warning buzzer operation possible

      Inval: Pre-crash safety system warning buzzer operation not possible

      -

      Pre-Crash Brake

      Pre-crash brake function

      Valid or Inval

      Valid: Pre-crash brake operation possible

      Inval: Pre-crash brake operation not possible

      -

      PBA Start

      Pre-crash brake assist activation signal

      OFF, Standby, Assist Lv1 or Assist Lv2

      OFF: Pre-crash brake assist not activated

      Standby: Pre-crash brake assist standby

      Assist Lv1: Pre-crash brake assist activated

      Assist Lv2: Pre-crash brake assist activated

      Signal status changes when the pre-crash brake assist is activated before a crash (Pre-crash brake will activate only in situations where the driver depresses the brake pedal)

      Warning Brake

      -

      -

      -

      Not applicable to the vehicle

      Brake Assist Standby

      Supplemental brake pressure signal

      ON or OFF

      ON: Supplemental brake pressure being provided

      OFF: Supplemental brake pressure not being provided

      -

      Pre-Crash Brake Control

      Pre-crash brake operational status

      ON or OFF

      ON: Pre-crash brake operating

      OFF: Pre-crash brake not operating

      -

      AVS Start

      -

      -

      -

      Not applicable to the vehicle

      VGRS Start

      -

      -

      -

      Not applicable to the vehicle

      PBA Control

      Pre-crash brake assist operational status

      Valid or Invalid

      Valid: Pre-crash brake assist control operation possible

      Invalid: Pre-crash brake assist control operation not possible

      -

      Pre-Crash Safety Brake Ind

      Pre-crash safety system alarm warning message status

      ON or OFF

      ON: Pre-crash safety system "BRAKE!" alert on

      OFF: Pre-crash safety system "BRAKE!" alert off

      "BRAKE!" is displayed

      PCS Crash Alarm Buzzer

      Skid control buzzer status

      ON or OFF

      ON: Skid control buzzer sounds

      OFF: Skid control buzzer does not sound

      -

      Front Radar-Low Voltage History

      Millimeter wave radar sensor assembly low voltage history

      ON or OFF

      ON: History of low voltage

      OFF: No history of low voltage

      -

      Front Radar-Incorrect Axial Gap (Vertical) History

      Millimeter wave radar sensor assembly vertical misalignment history

      ON or OFF

      ON: History of vertical misalignment

      OFF: No history of vertical misalignment

      -

      Front Radar-Incorrect Axial Gap (Horizontal) History

      Millimeter wave radar sensor assembly horizontal misalignment history

      ON or OFF

      ON: History of horizontal misalignment

      OFF: No history of horizontal misalignment

      -

      Front Recognition Camera-Malfunction History

      Forward recognition camera malfunction history (abnormal temperature, low voltage, DTC stored, etc.)

      ON or OFF

      ON: History of malfunction

      OFF: No history of malfunction

      -

      Control Mode

      ECU control mode status

      Normal or Check Mode

      Normal: Normal operation

      Check Mode: Operating in Control Mode

      -

      PCS Operation State Retention Setting

      Displays the setting of the PCS Operation State Retention Setting customize setting

      ON or OFF

      ON: PCS Operation State Retention Setting customize setting is set to ON

      OFF: PCS Operation State Retention Setting customize setting is set to OFF

      -

      PCS Alarm Activation Distance Retention Setting 1

      Displays the setting of the PCS Alarm Activation Distance Retention Setting 1 customize setting

      ON or OFF

      ON: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to ON

      OFF: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to OFF

      -

      PCS Alarm Activation Distance Retention Setting 2

      Displays the setting of the PCS Alarm Activation Distance Retention Setting 2 customize setting

      ON or OFF

      ON: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to ON

      OFF: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to OFF

      -

      PCS Alarm Activation Distance Retention Setting 3

      Displays the setting of the PCS Alarm Activation Distance Retention Setting 3 customize setting

      ON or OFF

      ON: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to ON

      OFF: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to OFF

      -