FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

    1. Apply a light coat of gasoline or spindle oil to a new O-ring and install the O-ring to the pressure regulator.

      Note:

      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the pressure regulator, be careful not to damage the O-ring.

    2. A218702

      While turning the pressure regulator left and right, install it to the delivery pipe.

    3. Install the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

    4. Connect the No. 1 air hose to the pressure regulator.

    5. Connect the No. 2 fuel tube to the pressure regulator (Click here).

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. INSTALL AIR CLEANER CAP AND HOSE

    Click hereClick hereClick here

  4. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click hereClick hereClick here

  5. INSPECT FOR FUEL LEAK

    Click hereClick here