REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Center) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH


    1. A005EEFE11
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat 3 Point Type Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear No. 1 seat belt RH not fastened Below 1 Ω
      1 - 2 Rear No. 1 seat belt RH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat 3 point type belt assembly RH.

  2. INSPECT REAR SEAT INNER BELT ASSEMBLY


    1. A005DKJE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear No. 1 seat belt center not fastened Below 1 Ω
      1 - 2 Rear No. 1 seat belt center fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly.