SPEED LIMITER SYSTEM ROAD TEST

  1. INSPECT SET FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. Check that the vehicle speed is limited to the set speed.

  2. INSPECT ACCELERATION FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. E123590

      Check that the vehicle limit speed increases by an interval of 5 km/h or 5 mph while the cruise control switch is pressed to +RES, and that the vehicle maintains the newly set speed when the switch is released.

    5. Tap the cruise control switch to +RES. Check that the vehicle limit speed increases by about 1 km/h or 1 mph each time the switch is tapped (tap-up control).

  3. INSPECT COAST FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. Check that vehicle limit speed decreases by an interval of 5 km/h or 5 mph while the cruise control switch is pressed to -SET, and that the vehicle maintains the newly set speed when the switch is released.

    5. Tap the cruise control switch to -SET. Check that the vehicle limit speed decreases by about 1 km/h or 1 mph each time the switch is tapped (tap-down control).

  4. INSPECT CANCEL FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. When performing one of the following, check that the speed limiter system control of vehicle speed is canceled and that the normal driving mode is reset.

      • Turning the speed limiter system off using the speed limiter switch

      • E123589

        Pushing the cruise control switch on

      • E123592

        Pulling the cruise control switch to CANCEL

  5. INSPECT RESUME FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. E123592

      Pull the cruise control switch to CANCEL.

    5. E123590

      After pressing the cruise control switch to +RES while driving the vehicle at 30 km/h or more, or 20 mph or more, check that the is resumed the vehicle limit speed set at the time of cancellation.

  6. INSPECT OVERRIDE FUNCTION

    1. Turn the speed limiter system on using the speed limiter switch.

    2. Drive the vehicle at 30 km/h or more, or 20 mph or more.

    3. E123591

      Press the cruise control switch to -SET.

    4. Fully depress the accelerator pedal and check that the vehicle accelerates beyond the set speed.