TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick here

  2. REMOVE BATTERY

    Click hereClick hereClick here

  3. REMOVE NO. 1 ENGINE COVER

    Click hereClick hereClick here

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereClick hereClick here

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  7. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR

    1. C156874

      Remove the 3 nuts and No. 1 front floor heat insulator.

  8. REMOVE REAR CONSOLE BOX ASSEMBLY (for Hatchback, Wagon)

    Click hereClick here

  9. REMOVE REAR CONSOLE BOX ASSEMBLY (for Sedan)

    Click hereClick here

  10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

    1. C272847

      Remove the clip and disconnect the transmission control select cable from the floor shift lever assembly.

    2. C272848

      Disconnect the transmission control shift cable from the floor shift lever assembly.

    3. C272824

      Disengage the 2 claws and separate the transmission control cable assembly from the shift lever assembly.

    4. C193810

      Remove the nut and disconnect the clip, clamp and wire harness.

    5. C276324N01

      Remove the 2 clips (A) and disconnect the transmission control cable assembly from the manual transaxle assembly.

    6. Remove the 2 clips (B) and disconnect the transmission control cable assembly from the control cable bracket assembly.

    7. C274373

      Remove the bolt and disconnect the transmission control cable assembly from the rear engine mounting bracket.

    8. C270661

      Remove the 2 nuts and then remove the transmission control cable assembly from the vehicle exterior.