FRONT BUMPER REASSEMBLY

PROCEDURE


  1. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. B004GDO

      Engage the claw.

    2. B004FKR

      Engage the clip as shown in the illustration.

    3. B004GV6

      Install the front bumper side retainer LH with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT


    1. B004G5I

      Install the front bumper reinforcement with the 6 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  4. INSTALL THERMISTOR ASSEMBLY

    Click here

  5. INSTALL POP-UP HOOD SENSOR ASSEMBLY

    Click here

  6. INSTALL NO. 1 FRONT BUMPER SIDE SUPPORT

    Click here

  7. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. B004F38

      Engage the 2 guides to install the front bumper energy absorber.

  8. INSTALL LOWER RADIATOR GRILLE MOULDING (for Sport Package)


    1. B004E63

      Engage the 8 claws to install the lower radiator grille moulding.

  9. INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Standard)


    1. A01WYPY

      Engage the 8 claws to install the lower radiator grille sub-assembly to the radiator grille.

  10. INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Sport Package)


    1. A01WXJ2

      Engage the 3 claws.

    2. A01WXFC

      Install the lower radiator grille sub-assembly to the radiator grille with the 3 screws.

  11. INSTALL NO. 3 RADIATOR GRILLE SEAL


    1. Clean the radiator grille moulding.


      1. Remove any remaining double-sided tape from the radiator grille moulding.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new No. 3 radiator grille seal.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. B004EN9

      Install the No. 3 radiator grille seal.

  12. INSTALL NO. 2 RADIATOR GRILLE SEAL

    Tech Tips

    Use the same procedure as for the No. 3 radiator grille seal.

  13. INSTALL RADIATOR GRILLE MOULDING (for Standard)


    1. A01WYQF

      Engage the 12 claws and 2 guides to install the radiator grille moulding.

  14. INSTALL RADIATOR GRILLE MOULDING (for Sport Package)


    1. A01WYNE

      Engage the 12 claws and 2 guides to install the radiator grille moulding.

  15. INSTALL RADIATOR GRILLE ASSEMBLY (for Standard)


    1. Engage the 9 guides and 8 claws.

      A01WXF8
    2. A01WXD3

      Install the radiator grille assembly with the 6 screws.

  16. INSTALL RADIATOR GRILLE ASSEMBLY (for Sport Package)


    1. Engage the 9 guides and 8 claws.

      A01WXFE
    2. A01WYL8

      Install the radiator grille assembly with the 6 screws.

  17. INSTALL NO. 2 RADIATOR GRILLE GARNISH (w/o Fog Light)


    1. B004FV4

      Engage the guide and 2 claws.

    2. B004F1U

      Install the No. 2 radiator grille garnish with the 3 screws.

  18. INSTALL RADIATOR GRILLE GARNISH (w/o Fog Light)

    Tech Tips

    Use the same procedure as for the No. 2 radiator grille garnish.

  19. INSTALL FOG LIGHT COVER LH (w/ Fog Light)


    1. B004EMK

      Engage the guide and 2 claws.

    2. B004G5B

      Install the fog light cover LH with the 2 screws.

  20. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  21. INSTALL SYMBOL EMBLEM (w/o Dynamic Radar Cruise Control System)


    1. A01WXGQ

      Engage the claw.

    2. A01WYAA

      Install the symbol emblem with the 2 screws.

  22. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control System)

    Tech Tips

    Use the same procedure as for the symbol emblem.

  23. INSTALL FRONT ENERGY ABSORBER MOUNTING PLATE


    1. Engage the 2 claws.

      A01WXF1

    2. Install the front energy absorber mounting plate with the 6 screws.

  24. INSTALL NO. 1 RADIATOR GRILLE SEAL (for Standard)


    1. A01WXAA

      Engage the 2 guides.

    2. Install the No. 1 radiator grille seal with the 2 screws.

  25. INSTALL LOWER RADIATOR GRILLE BRACKET


    1. for Standard:


      1. A01WYIO

        Engage the pin.

    2. A01WXZG

      Install the lower radiator grille bracket with the clip.

  26. INSTALL FRONT BUMPER BRACKET LH


    1. B004FHS

      Engage the 2 guides.

    2. Install the front bumper bracket LH with the clip.

  27. INSTALL FRONT BUMPER BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  28. INSTALL RADIATOR GRILLE PROTECTOR


    1. Clean the front bumper cover.


      1. Remove any remaining double-sided tape from the front bumper cover.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new radiator grille protector.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. B004FN7C01
      *a Double-sided Tape

      Engage the 15 clips to install the radiator grille protector.

  29. INSTALL FRONT BUMPER HOLE COVER LH (for Standard)


    1. B004F62C01
      *a Hook

      Engage the hook.

    2. Engage the 2 claws to install the front bumper hole cover LH.

  30. INSTALL FRONT BUMPER HOLE COVER LH (for Sport Package)


    1. B004GC8C01
      *a Hook

      Engage the hook.

    2. Engage the 3 claws to install the front bumper hole cover LH.

  31. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Standard)


    1. for Type A:


      1. B004EE2

        Engage the 4 claws.

      2. B004F07

        Install the front bumper extension mounting bracket with the 2 screws.

    2. for Type B:


      1. B004EUF

        Engage the 4 claws.

      2. B004FYA

        Install the front bumper extension mounting bracket with the 2 screws.

  32. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Sport Package)


    1. for Type A:


      1. B004EQZ

        Engage the 4 claws.

      2. B004FIH

        Install the front bumper extension mounting bracket with the 2 screws.

    2. for Type B:


      1. B004FWY

        Engage the 2 guides and 2 claws.

      2. B004FAH

        Install the front bumper extension mounting bracket with the 2 screws.

  33. INSTALL FRONT FENDER LINER RETAINER


    1. B004FYE

      Engage the 2 claws to install the 2 front fender liner retainers.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  34. INSTALL FOG LIGHT MOUNTING BRACKET LH


    1. B004ET5

      Engage the 4 claws to install the fog light mounting bracket LH.

  35. INSTALL FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  36. INSTALL AIR INTAKE DUCT LH


    1. B004EK7

      Engage the guide and claw.

    2. B004GAR

      Install the clip and 2 screws.

    3. B004G05C02
      *1 Pin Hold Clip
      *a Correct
      *b Incorrect

      Install the air intake duct LH with the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  37. INSTALL AIR INTAKE DUCT RH

    Tech Tips

    Use the same procedure as for the LH side.

  38. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  39. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  40. INSTALL CLEARANCE LIGHT ASSEMBLY LH

    Click here

  41. INSTALL CLEARANCE LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  42. INSTALL WASHER HOSE CLIP

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. Clean the front bumper cover.


      1. Remove any remaining double-sided tape from the front bumper cover.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Remove the release paper from a new washer hose clip.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. B004GW4C01
      *a Line

      Install the washer hose clip as shown in the illustration.

      Tech Tips

      Install the washer hose clip on the line marked on the front bumper cover.

  43. INSTALL WASHER HOSE


    1. Engage the 14 clamps to install the washer hose.

      B004GRQ

  44. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER LH

    Click here

  45. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  46. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH

    Click here

  47. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  48. INSTALL CONNECTOR COVER (w/o LEXUS Parking Assist-sensor System)


    1. B004GPA

      Engage the clamp to install the connector cover.

  49. INSTALL NO. 4 ENGINE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. for Standard:


      1. Engage the 15 clamps to install the No. 4 engine room wire.

        B004E2R

    2. for Sport Package:


      1. Engage the 13 clamps to install the No. 4 engine room wire.

        B004FC6

  50. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

  51. INSTALL NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)

    Click here

  52. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

  53. INSTALL NO. 2 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)

    Click here

  54. INSTALL RADIATOR GRILLE CENTER MOULDING LH (w/o LEXUS Parking Assist-sensor System)


    1. for Standard:


      1. B004E5Q

        Engage the 2 claws to install the radiator grille center moulding LH.

    2. for Sport Package:


      1. B004F6V

        Engage the 2 claws to install the radiator grille center moulding LH.

  55. INSTALL RADIATOR GRILLE CENTER MOULDING RH (w/o LEXUS Parking Assist-sensor System)

    Tech Tips

    Use the same procedure as for the LH side.