TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE

  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH

    1. C239105C04

      *a

      Component without harness connected

      (Tire Pressure Warning Reset Switch)

      *b

      On

      *c

      Off

      Remove the tire pressure warning reset switch.

      Click here

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (INT) - 2 (E)

      On

      Below 1 Ω

      Off

      10 kΩ or higher