DOOR CONTROL TRANSMITTER REMOVAL

Note

Take extra care when handling these precision electronic components.


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A01E1XBE01
      Text in Illustration
      *1 Protective Tape

      Twist a screwdriver in the direction of the arrow in the illustration and open the transmitter housing cover.

      Note

      Do not forcibly pry open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE


    1. A01DWUKE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver, remove the door control transmitter module.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE TRANSMITTER BATTERY


    1. A01DV05

      Detach the 2 claws and remove the transmitter battery cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    2. A01DW43E01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver, remove the battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. Doing so may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.