BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

   1. Using SST, install a new gasket and the back-up light switch assembly to the manual transaxle case.

      09817-16011

      40.2 N*m

      410 kgf*cm

      30 ft.*lbf

   2. Connect the back-up light switch connector.

2. INSTALL BATTERY BRACKET REINFORCEMENT

   Click here

3. INSTALL FRONT BATTERY BRACKET

   Click here

4. INSTALL BATTERY TRAY

5. INSTALL BATTERY

6. INSTALL BATTERY INSULATOR

7. INSTALL BATTERY CLAMP SUB-ASSEMBLY

   Click here

8. INSTALL AIR CLEANER CASE

   Click here

9. INSTALL AIR CLEANER FILTER ELEMENT

10. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

11. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here