REAR BUMPER(for Wagon) REASSEMBLY

PROCEDURE


  1. INSTALL REAR BUMPER PAD LH

    Tech Tips

    When installing the rear bumper pad, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A004RMYE01
      Text in Illustration
      *a Mark-off Line

      Install a new rear bumper pad.


      1. Remove the peeling paper from the face of a new rear bumper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear bumper pad LH with the mark-off line of the rear bumper cover and install it as shown in the illustration.

        Tech Tips

        Press the rear bumper pad LH firmly to install it.

  2. INSTALL REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. Attach the 2 claws and guide to install the reflex reflector assembly LH.

    2. Install the screw.

  4. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.