METER / GAUGE SYSTEM PRECAUTION

IGNITION SWITCH EXPRESSIONS

1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

   Expression	Ignition Switch (Position)	Engine Switch (Condition)
   Ignition Switch off	LOCK	Off (Lock)
   Ignition Switch ACC	ACC	On (ACC)
   Ignition Switch ON	ON	On (IG)
   Engine Start	START	On (Start)

COMBINATION METER ASSEMBLY DISPLAY CHANGE DUE TO BATTERY DISCONNECTION

1. When the battery is disconnected, the information stored in the combination meter assembly is cleared. As a result, the combination meter assembly display changes back to its default setting.

   Table 1. for Segment Display Type

   Type	Item Name	Default Value
   ODO/TRIP	ODO/TRIP display	ODO display
   	Trip A/B	0
   Drive monitor	Average fuel consumption	0
   	Cruising range	0
   	Average vehicle speed	0

   Table 2. for TFT Display Type

   Type	Item Name	Default Value
   Meter settings	Tab top position	Tab top position
   ODO/TRIP	ODO/TRIP display	ODO display
   	Trip A/B	0
   Drive monitor	Average fuel consumption (After reset)	0
   	Average fuel consumption (After refuel)	0
   	Average speed (After reset)	0
   	Fuel Saved After Reset*	0
   	Elapsed time (After reset)	00:00:00
   	Oil maintenance mileage	0
   	Distance (Range)	0

   *: w/ Stop and Start System

   Tip:

   The displayed contents and opening screen may change when connected ECUs are recognized.