INTRUSION SENSOR INSTALLATION

PROCEDURE

1. INSTALL THEFT WARNING RADAR SENSOR

   1. Install the theft warning radar sensor with the 4 screws.

   2. w/ Sliding Roof:

      1. Attach the 2 claws and install the overhead junction block assembly.

      2. Install the 6 screws.

   3. w/o Sliding Roof:

      1. Attach the 2 claws and install the overhead junction block assembly.

      2. Install the 5 screws.

   4. w/ Sliding Roof:

      1. Connect the connectors.

      2. Attach the 2 clamps and install the 2 screws.

   5. w/o Sliding Roof:

      1. Connect the connectors.

      2. Attach the 3 clamps and install the 2 screws.

2. INSTALL AMPLIFIER MICROPHONE ASSEMBLY

   Click here

3. INSTALL MAP LIGHT ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick here