REAR CENTER SEAT OUTER BELT ASSEMBLY(for Sedan) INSTALLATION

PROCEDURE

  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    Click here

  2. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    1. Engage the guide and install the rear seat inner with center belt assembly RH with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

    2. Check that the ELR locks.

      Note:

      The check should be performed with the rear seat inner with center belt assembly RH installed.

      1. With the rear seat inner with center belt assembly RH installed, check that the belt locks when it is pulled out quickly.

    3. B351080C01
      V100155

      Protruding Part

      Connect the floor anchor of the rear seat inner with center belt assembly RH with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Note:

      • Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.

    4. w/ Rear Seat Belt Warning:

      1. Connect the connector.

  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

  4. INSTALL PACKAGE TRAY TRIM BELT HOLE COVER

    Click here

  5. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click hereClick hereClick here

  6. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  7. INSTALL REAR SEAT SIDE GARNISH LH

    Click hereClick hereClick here

  8. INSTALL REAR SEAT SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  9. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)

    Click hereClick hereClick here

  10. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  11. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click hereClick hereClick here

  12. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click hereClick hereClick here

  13. INSTALL REAR DOOR SCUFF PLATE LH

    Click hereClick hereClick here

  14. INSTALL REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  15. INSTALL REAR SEAT ASSEMBLY

    Click here