FUEL SENDER GAUGE ASSEMBLY REMOVAL

PROCEDURE

  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click hereClick here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    1. A286572

      Disconnect the 3 harness clamps.

      Note:

      Do not damage the wire harness.

    2. A286571

      Remove the harness protector from the wire harness.

      Note:

      Do not damage the wire harness.

    3. A222038

      Disconnect the fuel sender gauge assembly connector.

    4. A286573

      Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.