FRONT POWER SEAT CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Entry & Start or Seat

      5. Select the setting by referring to the table below.


        Entry & Start
        Tester Display Description Default Setting ECU
        Seat position/Tilt & Telesco memory recall setting This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door 0:D Door,1:Any Door Main body ECU (Multiplex network body ECU)

        Seat
        Tester Display Description Default Setting ECU
        Seat Move Distance Allows customizing of the seat movement distance for the power easy access system. Standard 00:OFF,01:Little,10:Standard Main body ECU (Multiplex network body ECU)

    2. Customizing with the multi-display


      1. Turn the power switch on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Other Vehicle Settings (Type A).

      3. Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Other Vehicle Settings (Type B).

      4. Select the setting by referring to the table below.

        Display Description Default Setting Relevant ECU
        Driver's seat easy-exit slide Allows customizing of the seat movement distance for the power easy access system. Full Off / Partial / Full Main body ECU (Multiplex network body ECU)