ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.

DTC No.

Detection Item

INF Code

DTC Detection Condition

Trouble Area

Note

C1300

Skid Control ECU Malfunction

-

Skid control ECU (Brake booster with master cylinder assembly) internal malfunction

Skid control ECU (Brake booster with master cylinder assembly)

Electronically controlled brake system DTC

PROCEDURE

  1. REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

    1. Replace the skid control ECU (brake booster with master cylinder assembly).

      for LHD:Click here

      for RHD:Click here

    2. Perform initialization and calibration of the linear solenoid valve.

      Click here

      Chassis > ABS/VSC/TRC > Utility

      Tester Display

      ECB Utility

    3. Perform zero point calibration of the yaw rate and acceleration sensor.

      Click here

      Chassis > ABS/VSC/TRC > Utility

      Tester Display

      Test Mode

    4. Perform the sensor check in Test Mode Procedure.

      Click here

      Chassis > ABS/VSC/TRC > Utility

      Tester Display

      Signal Check

    Result

    Proceed to

    NEXT
    NEXT

    END