AIR CONDITIONING PANEL(for Manual Air Conditioning System) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  3. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  4. REMOVE STEREO OPENING COVER (w/o Audio)

    Click hereClick here

  5. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

    Click hereClick here

  6. REMOVE NAVIGATION RECEIVER (w/ Navigation System)

    Click hereClick here

  7. REMOVE AIR CONDITIONING PANEL ASSEMBLY

    1. E269436

      Detach the 2 clips and 2 hooks.

    2. Disconnect the connector.

    3. E269428

      Detach the 2 claws and disconnect the airmix damper control cable sub-assembly.

    4. E269429

      Detach the 2 claws, disconnect the No. 2 heater control cable sub-assembly and then remove the air conditioning panel assembly.