OUTER REAR VIEW MIRROR INSPECTION

PROCEDURE

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

   

   Text in Illustration

   *1	Component without harness connected Outer Rear View Mirror LH

   
   

   1. Apply battery voltage and check the operation of the mirror.

      OK

      Measurement Condition Specified Condition Battery positive (+) → Terminal 7 (MV) Battery negative (-) → Terminal 14 (M+) Turns upward (A) Battery negative (-) → Terminal 7 (MV) Battery positive (+) → Terminal 14 (M+) Turns downward (B) Battery positive (+) → Terminal 13 (MH) Battery negative (-) → Terminal 14 (M+) Turns left (C) Battery negative (-) → Terminal 13 (MH) Battery positive (+) → Terminal 14 (M+) Turns right (D)

      If the result is not as specified, replace the mirror assembly.

   2. For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

      

      *1	(A) Forward Position
      *2	Component without harness connected: (Outer Rear View Mirror LH)
      *3	(C) Driving Position
      *4	(E) Retracted Position

      OK

      Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Forward position (A) Does not move Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Driving position (C) Does not move Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Retracted position (E) Does not move Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Retracted position (E) Moves from (E) to driving position (C)

      Note

      
      

      • Disconnect and reconnect the battery between each mirror position check.

      
      

      • Do not apply battery voltage when moving the mirror by hand into each mirror position.

      If the result is not as specified, replace the mirror assembly.

   3. 

      Text in Illustration

      *1	Component without harness connected Outer Rear View Mirror LH

      Check the mirror heater.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition Terminal 8 (+) - Terminal 9 (-) 25°C (77°F) 12.4 to 15.4 Ω

         If the result is not as specified, replace the mirror assembly.

      2. Apply battery voltage and check the operation of the mirror heater.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 8 (+) Battery negative (-) → Terminal 9 (-) Mirror becomes warm

         Tech Tips

         It will take a short time for the mirror to become warm.

         If the result is not as specified, replace the mirror assembly.

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH

   

   Text in Illustration

   *1	Component without harness connected Outer Rear View Mirror RH

   
   

   1. Apply battery voltage and check the operation of the mirror.

      OK

      Measurement Condition Specified Condition Battery positive (+) → Terminal 7 (MV) Battery negative (-) → Terminal 14 (M+) Turns upward (A) Battery negative (-) → Terminal 7 (MV) Battery positive (+) → Terminal 14 (M+) Turns downward (B) Battery positive (+) → Terminal 13 (MH) Battery negative (-) → Terminal 14 (M+) Turns left (C) Battery negative (-) → Terminal 13 (MH) Battery positive (+) → Terminal 14 (M+) Turns right (D)

      If the result is not as specified, replace the mirror assembly.

   2. For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

      

      *1	(A) Forward Position
      *2	Component without harness connected: (Outer Rear View Mirror LH)
      *3	(C) Driving Position
      *4	(E) Retracted Position

      OK

      Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Forward position (A) Does not move Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Driving position (C) Does not move Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 5 (MR) Battery negative (-) → Terminal 6 (MF) Retracted position (E) Does not move Battery negative (-) → Terminal 5 (MR) Battery positive (+) → Terminal 6 (MF) Retracted position (E) Moves from (E) to driving position (C)

      Note

      
      

      • Disconnect and reconnect the battery between each mirror position check.

      
      

      • Do not apply battery voltage when moving the mirror by hand into each mirror position.

      If the result is not as specified, replace the mirror assembly.

   3. 

      Text in Illustration

      *1	Component without harness connected Outer Rear View Mirror RH

      Check the mirror heater.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition Terminal 8 (+) - Terminal 9 (-) 25°C (75°F) 12.4 to 15.4 Ω

         If the result is not as specified, replace the mirror assembly.

      2. Apply battery voltage and check the operation of the mirror heater.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 8 (+) Battery negative (-) → Terminal 9 (-) Mirror becomes warm

         Tech Tips

         It will take a short time for the mirror to become warm.

         If the result is not as specified, replace the mirror assembly.