CAUTION / NOTICE / HINT
Tech Tips
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL REAR UPPER BUMPER RETAINER LH
Attach the 2 claws to install the rear upper bumper retainer.
Install the 2 screws.
INSTALL REAR UPPER BUMPER RETAINER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR NO. 2 BUMPER SIDE RETAINER LH
Attach the 3 claws to install the rear No. 2 bumper side retainer.
Install the screw.
INSTALL REAR NO. 2 BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR BUMPER SIDE RETAINER LH
Attach the 3 claws to install the rear bumper side retainer.
Install the 2 screws and bracket.
INSTALL REAR BUMPER SIDE RETAINER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH
Install the rear bumper arm with the 3 bolts.
INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR NO. 1 BUMPER REINFORCEMENT
Install the rear No. 1 bumper reinforcement with the 8 bolts.
INSTALL REAR BUMPER COVER
w/o TOYOTA Parking Assist-sensor System:
Attach the 20 claws to install the rear bumper cover.
w/ TOYOTA Parking Assist-sensor System:
Connect the No. 2 frame wire connector and attach the 20 claws to install the rear bumper cover.
Install the 4 screws, 2 bolts and 8 clips.
INSTALL REAR BUMPER PLATE LH
Attach the 2 claws to install the rear bumper plate.
INSTALL REAR BUMPER PLATE RH
Tech Tips
Use the same procedure described for the LH side.