DOWNHILL ASSIST CONTROL SWITCH REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click hereClick here

2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

   Click hereClick here

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   Click hereClick here

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click hereClick here

5. REMOVE COMBINATION SWITCH ASSEMBLY (DOWNHILL ASSIST CONTROL SWITCH)

   1. 

      Remove the 4 screws and combination switch (downhill assist control switch) from the upper console panel.