DOOR CONTROL RECEIVER REMOVAL

PROCEDURE

1. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

   Click here

2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

   Click here

3. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)

   Click here

4. REMOVE DECK BOARD ASSEMBLY (for Full Size Spare Tire)

   Click here

5. INSTALL REAR NO. 2 FLOOR BOARD

   Tip:

   Use the same procedure described for the rear No. 3 floor board side.

   Click here

6. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

7. REMOVE REAR DECK TRIM COVER (for Full Size Spare Tire)

   Click here

8. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (w/o Spare Tire, for Compact Spare Tire)

   Click here

9. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)

   Click here

10. REMOVE REAR SEAT ASSEMBLY

    Click here

11. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

13. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

14. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

15. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

16. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Click here

17. REMOVE DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

    1. 

       Disconnect the connector.

    2. Remove the bolt and door control receiver.

18. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

    1. 

       Disconnect the connector.

    2. Remove the bolt and door control and tire pressure monitoring system receiver assembly.