REAR CENTER SEAT OUTER BELT ASSEMBLY(for Sedan) REMOVAL

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

   Click here

2. REMOVE REAR DOOR SCUFF PLATE LH

   Click hereClick hereClick here

3. REMOVE REAR DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side.

4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

5. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

   Tip:

   Use the same procedure as for the LH side.

6. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)

   Click hereClick hereClick here

7. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

   Tip:

   Use the same procedure as for the LH side.

8. REMOVE REAR SEAT SIDE GARNISH LH

   Click hereClick hereClick here

9. REMOVE REAR SEAT SIDE GARNISH RH

   Tip:

   Use the same procedure as for the LH side.

10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click hereClick hereClick here

11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

12. REMOVE PACKAGE TRAY TRIM BELT HOLE COVER

    Click here

13. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

14. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    1. w/ Rear Seat Belt Warning:

       1. 

          Disconnect the connector.

    2. 

       Remove the bolt and disconnect the floor anchor of the rear seat inner with center belt assembly RH.

    3. 

       Remove the bolt.

    4. Disengage the guide to remove the rear seat inner with center belt assembly RH.