ROOM TEMPERATURE SENSOR(for Automatic Air Conditioning System) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

    E183038

    1. Attach the 2 claws to install the sensor.

    2. Connect the connector and aspirator hose.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  5. CHECK SRS WARNING LIGHT

    1. Check the SRS warning light (Click here).