REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY


    1. A005AA4

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      A005CWR Protective Tape
    2. A005BGF

      Remove the 2 bolts.

    3. A005B25

      Using a clip remover, remove the 4 clips.

    4. A005CZ3

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the 2 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A005CZQ

      Disengage the 5 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A005C5M

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.