INTAKE SYSTEM


  1. OUTLINE


    1. By integrating the inlet duct and resonator into the air cleaner inlet assembly, a lightweight design has been achieved.

    2. The intake air flow meter sub-assembly consists of a silicon chip sensor to improve the flow rate accuracy and to ensure responsiveness.

    3. The intake manifold is made of thin casted aluminum.

    4. A plastic intake air surge tank assembly is used.

    5. A linkless-type throttle body with motor assembly is used to achieve excellent throttle control.

    6. The Electronic Throttle Control System-intelligent (ETCS-i) is used to ensure excellent throttle control in all operating ranges.

    7. An intake air sound generator is provided for some models.