FUEL FILTER REPLACEMENT

CAUTION / NOTICE / HINT

Tip:

  • When replacing the fuel filter element, use TOYOTA genuine parts.

  • When replacing the fuel filter element, clean the fuel filter case and remove dirt completely.

PROCEDURE

  1. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for RHD)

    Click here

  2. REMOVE COWL TOP VENTILATOR LOUVER (for LHD)

    1. A362719

      Detach the 5 clows to remove the cowl top ventilator louver.

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 1 FUEL FILTER PROTECTOR

    1. A362573

      Rmove the 2 nuts and No. 1 fuel filter protector.

  6. REMOVE FUEL FILTER ELEMENT

    1. A362574

      Disconnect the No. 1 fuel hose and No. 3 fuel hose from the fuel filter assemly.

      Click here

    2. A362570

      Put a container under the fuel filter assembly.

    3. Loosen the drain cock to drain fuel.

    4. Tighten the drain cock.

    5. A362575

      Disengage the lock, pull down the lever and disconnect the fuel heater connector.

    6. A362576

      Using a 24 mm deep socket wrench, remove the fuel filter cap from the fuel filter case.

    7. Remove the fuel filter element from the fuel filter case.

    8. A362720

      Remove the O-ring from the fuel filter cap.

  7. INSTALL FUEL FILTER ELEMENT

    1. Clean the fuel filter case and remove dirt completely.

    2. Install a new O-ring to the fuel filter cap.

    3. Install the fuel filter element to the fuel filter case.

    4. Using a 24 mm deep socket wrench, install the fuel filter cap to the fuel filter case.

      25 N*m

      255 kgf*cm

      18 ft.*lbf

    5. Connect the fuel heater connector and lock with the lever.

    6. Connect the No. 1 fuel hose and No. 3 fuel hose to the fuel filter assemly.

      Click here

  8. INSTALL NO. 1 FUEL FILTER PROTECTOR

    1. Install the No. 1 fuel filter protector with the 2 nuts.

      17.5 N*m

      178 kgf*cm

      13 ft.*lbf

  9. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY

    Click here

  11. INSTALL COWL TOP VENTILATOR LOUVER (for LHD)

    1. Attach the 5 claws to install the cowl top ventilator louver.

  12. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for RHD)

    Click here

  13. INSPECT FOR FUEL LEAK

    Click here