REAR BUMPER(for Hatchback) DISASSEMBLY
PROCEDURE
REMOVE NO. 3 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)
REMOVE ULTRASONIC SENSOR BEZEL (w/ TOYOTA Parking Assist-sensor System)
REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
-
Disengage the 2 clamps and remove the No. 2 luggage room wire.
-
REMOVE LICENSE PLATE BRACKET (w/ Bracket)
-
Remove the 2 screws and license plate bracket.
-
REMOVE REAR LICENSE PLATE CUSHION
Remove the 6 rear license plate cushions.
w/ Bracket:
-
Remove the 2 rear license plate cushions.
-
REMOVE REFLEX REFLECTOR ASSEMBLY LH
-
Remove the screw.
Disengage the claw and remove the reflex reflector assembly LH.
-
REMOVE REFLEX REFLECTOR ASSEMBLY RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER GUARD
-
Remove the 4 screws.
-
Disengage the 11 claws and remove the rear bumper guard.
-
REMOVE REAR BUMPER SIDE MOULDING LH
-
Remove the 3 screws.
Disengage the 4 claws and rear bumper side moulding LH.
-
REMOVE REAR BUMPER SIDE MOULDING RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER MOULDING
-
Remove the 3 screws.
Disengage the 2 claws and 3 guides, and remove the rear bumper moulding.
-
REMOVE REAR BUMPER SIDE RETAINER LH
-
Remove the 2 screws.
Disengage the 3 claws and remove the rear bumper side retainer LH.
-
REMOVE REAR BUMPER SIDE RETAINER RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
REMOVE REAR COMBINATION LIGHT ASSEMBLY RH
Tip:Use the same procedure as for the LH side.
REMOVE UPPER REAR BUMPER RETAINER LH
-
Remove the screw and upper rear bumper retainer LH.
-
REMOVE UPPER REAR BUMPER RETAINER RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER SIDE SEAL LH
-
Remove the 3 clips and rear bumper side seal LH.
-
REMOVE REAR BUMPER SIDE SEAL RH
-
Remove the 3 clips and rear bumper side seal RH.
-
REMOVE NO. 1 REAR BUMPER REINFORCEMENT
-
Remove the 8 bolts and No. 1 rear bumper reinforcement.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH
-
Remove the 3 bolts and rear bumper arm sub-assembly LH.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH
Tip:Use the same procedure as for the LH side.