EXHAUST GAS TEMPERATURE SENSOR INSTALLATION


  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

    2. A01DXFGE01
      Text in Illustration
      *1 Wire Harness
      *2 Clamp

      Attach the 5 clamps.

      Tech Tips

      Make sure that the part of the wire harness is as shown in the illustration.

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      A01DY08E01

      The sensor should be assembled within 20° of the prescribed position on either side.

      Text in Illustration
      *a Top
      *b LH

  4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here