REAR BUMPER(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER UPPER RETAINER LH

   
   

   1. Attach the 2 claws to install the rear bumper upper retainer LH.

   2. Install the screw.

2. INSTALL REAR BUMPER UPPER RETAINER RH

   Tech Tips

   Use the same procedure described for the LH side.

3. INSTALL REAR BUMPER NO. 2 SIDE RETAINER LH

   
   

   1. Attach the 3 claws to install the rear bumper No. 2 side retainer LH.

   2. Install the 2 screws.

4. INSTALL REAR BUMPER NO. 2 SIDE RETAINER RH

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL REAR BUMPER SIDE RETAINER LH

   
   

   1. Attach the 3 claws to install the rear bumper side retainer LH.

   2. Install the 2 screws.

   3. Install the rear bumper bracket.

6. INSTALL REAR BUMPER SIDE RETAINER RH

   Tech Tips

   Use the same procedure described for the LH side.

7. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

   
   

   1. Install the rear bumper arm sub-assembly LH with the 3 bolts.

      Torque:

      12 N*m  { 117 kgf*cm, 8 ft.*lbf }

8. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

9. INSTALL REAR BUMPER NO. 1 REINFORCEMENT

   
   

   1. Install the rear bumper No. 1 reinforcement with the 8 bolts.

      Torque:

      12 N*m  { 117 kgf*cm, 8 ft.*lbf }

10. INSTALL REAR BUMPER COVER

    
    

    1. Attach the 22 claws to install the rear bumper cover.

    2. Install the 2 screws.

    3. Attach the claw to install the rear bumper stopper.

       Tech Tips

       Use the same procedure for the other side.

    4. Install the screw.

       Tech Tips

       Use the same procedure for the other side.

    5. Install the 8 clips.

    6. Install the clip.

       Tech Tips

       Use the same procedure for the other side.

11. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

12. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

    Click here