FRONT POWER SEAT MOTOR ASSEMBLY (for Rear Lifter) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01E03GE02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01DXK4E02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD RH


    1. A01DXZM

      Remove the 2 screws.

    2. A01DXHX

      Remove the 3 screws.

    3. Detach the claw and guide.

    4. Remove the front seat cushion shield RH.

  5. REMOVE FRONT POWER SEAT SWITCH RH


    1. A01E164

      Remove the 3 screws.

    2. Disconnect the connector and remove the front power seat switch RH.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    1. A01DYHP

      Remove the screw.

    2. Detach the claw and guide.

    3. A01DYCZ

      Pull the front seat inner cushion shield RH to detach the claw and remove the front seat inner cushion shield RH.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    A01DXC2E01

    1. Disconnect the connector and detach the 3 clamps.

    2. A01DZ9C

      Roll up the front seat cushion cover LH.

    3. Remove the nut and front seat inner belt assembly.

    4. Remove the buckle cover.

  8. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    1. A01DWZO

      Remove the hog rings.

    2. A01E0XQ

      for LHD, w/ Seat Heater System:


      1. Disconnect the 2 front seat cushion heater assembly LH connectors.

      2. Detach the 4 front seat cushion heater assembly LH clamps.

    3. Bend the 2 front seat cushion frame claws upward.

    4. Detach the hooks and remove the front seat cushion cover with pad.

      A01DYXT

  9. REMOVE POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)


    1. A01DWC3

      Detach the 2 wire harness clamps.

    2. Detach the 4 clamps indicated by the arrows in the illustration and remove the seat cushion spring.

    3. A01DZ3B

      Remove the 4 bolts and seat cushion frame.

    4. A01E2PM

      Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts for the tilt rod.

    5. Remove the nut and tilt rod.

    6. A01DYYGE02

      Disconnect the connector.

    7. Using a T40 "TORX" socket wrench, remove the "TORX" bolt for the adjust screw.

    8. Using a 4 mm socket hexagon wrench, remove the 2 bolts and power seat motor assembly (for Rear Lifter).

      Tech Tips

      When the adjust screw is locked in the uppermost or lowermost position, turn the adjust screw to release the lock before removing the power seat motor assembly.

      Text in Illustration
      *1 Adjust Screw