NAVIGATION SYSTEM(for Radio and Display Type) Cellular Phone Inspection

DTC Code DTC Name
Cellular Phone Inspection

CAUTION / NOTICE / HINT

Tip:

If the operation of a cellular phone or the radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

PROCEDURE

  1. CHECK USAGE CONDITION

    1. Check that the vehicle and cellular phone meet the following conditions:

      Note:

      If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

      • The cellular phone is "Bluetooth" compatible.

        Click hereClick here

      • The cellular phone is registered as a hands-free device.

      • "Bluetooth" setting of the cellular phone is on.

      • The "Wi-Fi" setting of the radio and display receiver assembly and cellular phone is off.

      • Operating system and software of the cellular phone are the latest versions.

      • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

    2. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      OK

      The cellular phone is connected correctly.

    Result

    Proceed to

    OK

    NG
    OK

    END (USAGE CONDITIONS DEFECTIVE)

    NG

  2. RESTART CELLULAR PHONE

    1. Restart the cellular phone.

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ACC.

    4. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      OK

      The cellular phone is connected correctly.

    Result

    Proceed to

    OK

    NG
    OK

    END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)

    NG

  3. CHECK OPERATION

    1. Check if the in-vehicle device can be recognized by the cellular phone.

      OK

      In-vehicle device can be recognized

    Result

    Proceed to

    OK

    NG
    NG

    CHECK USING ANOTHER VEHICLEClick here

    OK

  4. REGISTRATION AGAIN

    1. Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly.

    2. Register the cellular phone again.

    3. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      OK

      The cellular phone is connected correctly.

    Result

    Proceed to

    OK

    NG
    OK

    END (TEMPORARY MALFUNCTION WITH "Bluetooth")

    NG

  5. CHECK USING ANOTHER VEHICLE

    1. Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

      Tip:

      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      OK

      The cellular phone is connected correctly.

    Result

    Proceed to

    OK

    NG
    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click hereClick here

    NG

  6. CHECK USING ANOTHER CELLULAR PHONE

    1. Check if the system functions normally using another "Bluetooth" compatible cellular phone.

      Tip:

      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      OK

      The cellular phone is connected correctly.

    Result

    Proceed to

    OK

    NG
    OK

    END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click hereClick here