COMMON RAIL (for DPF) INSPECTION


  1. INSPECT COMMON RAIL ASSEMBLY


    1. A01DWI3E02
      Text in Illustration
      *a

      Component without harness connected

      (Common Rail)

      Inspect the fuel pressure sensor.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 25°C (77°F) 16.4 kΩ or less
        5 - 4 25°C (77°F) 16.4 kΩ or less
        1 - 2 25°C (77°F) 3 kΩ or less
        6 - 5 25°C (77°F) 3 kΩ or less

        If the result is not as specified, replace the common rail assembly.

    2. Inspect the pressure discharge valve.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.96 to 1.16 Ω

        If the result is not as specified, replace the common rail assembly.