COMBINATION METER REMOVAL

PROCEDURE

  1. PRECAUTION

    Click hereClick here

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick here

  2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  3. REMOVE HORN BUTTON ASSEMBLY

    Click here

  4. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    1. E295092

      Disengage the 2 clips and 2 guides, and remove the instrument cluster finish panel assembly as shown in the illustration.

  6. REMOVE UPPER NO. 2 STEERING COLUMN COVER

    1. E295094

      Remove the 2 screws.

    2. E295095

      Disengage the 2 guides and remove the upper No. 2 steering column cover as shown in the illustration.

  7. REMOVE COMBINATION METER ASSEMBLY

    1. E295097

      Remove the 2 bolts.

    2. E295098

      Disengage the 2 guides as shown in the illustration.

    3. Disconnect the 2 connectors and remove the combination meter assembly.