WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED / RECONNECTED

Refer to the TOYOTA Repair Manual for each work procedure.

  1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED

    Necessary Procedures

    Effect/Inoperative Function When Necessary Procedures are not Performed

    Drive the vehicle until stop and start control is permitted (approximately 15 to 40 minutes)

    Stop and start system

    Reset back window close position

    Back window lock
Note:

After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 80 seconds before disconnecting the cable from the negative (-) battery terminal.