FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE WIRE HARNESS CLAMP BRACKET

    Click here

  3. REMOVE CRANKSHAFT PULLEY


    1. B005S3IC01
      *a Hold
      B006AHR Turn

      Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. B005U9YC01
      *a Hold
      B006AHR Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

  4. REMOVE CRANKSHAFT TIMING GEAR KEY


    1. B005TGK

      Remove the crankshaft timing gear key of the key groove.

  5. REMOVE TIMING CHAIN CASE OIL SEAL


    1. B005URHC01
      *a Protective Tape

      Using a screwdriver with its tip taped, pry out the timing chain case oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.